Call us Monday - Friday 7am - 5pm PST
(800) 800-8444 or (775) 355-1199

G-Force IR350 Hammer (5")

Regular Price:

$5,040.00
OR
  • DESCRIPTION
  • REVIEWS
  • G-Force GFR5000 IR350 Shank

    Hammer Specifications - G-Force IR350 Shank

    Main Features

    • Manufactured from the finest steel available in today's market

    • Several different types of stress-relieving and heat-treatment processes are performed on these hammers

    • Carburizing of the piston makes for long-lasting products

    • Hardness of 60 HRC

    • Back reaming carbides on 6” Models

    • No make-up rings to replace

    • No shims

    • Easy to service

    • Fast performance, unparalleled

    • Runs excellent under water

    • Handles injection of foam and polymers, without affecting performance

     

    Item #

    Description

    Part #

    1

    Back Head

    G5001

    2

    Back Head O-Ring

    G5002

    3

    Choke

     

    4

    Air Check Valve

    G5004

    5

    Air Check Valve Spring

    G5005

    6

    Make-Up Rubber (Buffering)

    G5006

    7

    Spacer Tube

    G5007

    8

    Air Distributor

    G5008

    9

    Air Distributor O-Ring

    G5009

    10

    Cylinder

    G5010

    11

    Cylinder Stop Ring

    G5011

    12

    Wear Sleeve

    G5012

    13

    Piston

    G5R5013

    14

    Piston Stop Ring

    G5R5014

    15

    Bit Retaining O-Ring

    G5R5015

    16

    Bit Retaining Ring

    G5R5016

    17

    Chuck (Drive Sub)

    G5R5017

     

    Choke Plug Kit

    G5029

     

    O-Ring Kit

    G5030

    Features:

     
    • Easy to service

    • Special heat-treated alloy piston for long life, Rockwell hardness 60

    • Reversible wear sleeve

    • Minimum loss of performance when injecting foam or water

     

    Length (w/o drill bit)

    45.17"

    Outside Diameter

    4.527"

    Weight (w/o bit)

    127 lbs.

    Cylinder Bore

    3.465"

    Piston O.D.

    3.736"

    Piston Stroke

    3.93"

    Piston Weight

    26 lbs.

    Hole Sizes

    5" - 6 1/2"

    Air Pressure Consumption

    100 psi - 350 psi

    Wrench Size

    A/F 3.464"

    Connection

    Std. 3 1/2" API Reg Pin

    Air Consumption Chart

    PSI

    150

    200

    250

    300

    350

    400

    CFM with blank choke

    280

    400

    520

    660

    800

    -

    with 1/8" choke

    375

    595

    760

    925

    1,060

    1,205

    with 1/4" choke

    425

    665

    845

    1,095

    1,270

    1,350


    All Hammers come Fitted with Blank Choke located in the Dart Valve


    Lubrication

    G-Force Series Hammers are precision-made tools and should be treated as such. Only the highest quality lubrication should be used and a constant flow of oil must be maintained at all times. Recommended lubrication amount 1/3 Pint per 100 cfm per hour.

    Recommended Grades of Lubricant

    ESSO
    MATEX
    CASTROL
    SHELL
    MOBILE

    AROX EP 150
    RDO 302
    RD OIL DP 100
    AIR TOOL OIL S2 A 320
    ALMO NO. 5

    Heavy duty oil is recommended for all year-round use, in particular where air supply to the hammer is at high temperature. If lighter grade oil is required due to very low ambient temperatures, amount of oil being used should be increased by 30 percent.

    Recommended Pull Down

    Minimum @ 100 psi - 500 lbs.

    Maximum @ 350 psi - 2000 lbs.



    Missile Warranty will be voided by the following:

    1. Welding on Wear Sleeve.

    2. Heating Case with a Torch.

    3. Gripping Wrenches across Threads.

    4. Hammering on Casing.

    READ WARNING LABEL ATTACHED TO HAMMER.



  • Write A Review For G-Force IR350 Hammer (5")

    How do you rate this product? *

    • Quality
    • Price
    • Value